diff --git a/baas-1601-dc1/ec2.ini b/baas-1601-dc1/ec2.ini
new file mode 100644
index 0000000..36b3921
--- /dev/null
+++ b/baas-1601-dc1/ec2.ini
@@ -0,0 +1,200 @@
+# Ansible EC2 external inventory script settings
+#
+
+[ec2]
+
+# to talk to a private eucalyptus instance uncomment these lines
+# and edit edit eucalyptus_host to be the host name of your cloud controller
+#eucalyptus = True
+#eucalyptus_host = clc.cloud.domain.org
+
+# AWS regions to make calls to. Set this to 'all' to make request to all regions
+# in AWS and merge the results together. Alternatively, set this to a comma
+# separated list of regions. E.g. 'us-east-1,us-west-1,us-west-2'
+regions = all
+regions_exclude = us-gov-west-1,cn-north-1
+
+# When generating inventory, Ansible needs to know how to address a server.
+# Each EC2 instance has a lot of variables associated with it. Here is the list:
+#   http://docs.pythonboto.org/en/latest/ref/ec2.html#module-boto.ec2.instance
+# Below are 2 variables that are used as the address of a server:
+#   - destination_variable
+#   - vpc_destination_variable
+
+# This is the normal destination variable to use. If you are running Ansible
+# from outside EC2, then 'public_dns_name' makes the most sense. If you are
+# running Ansible from within EC2, then perhaps you want to use the internal
+# address, and should set this to 'private_dns_name'. The key of an EC2 tag
+# may optionally be used; however the boto instance variables hold precedence
+# in the event of a collision.
+destination_variable = public_dns_name
+
+# This allows you to override the inventory_name with an ec2 variable, instead
+# of using the destination_variable above. Addressing (aka ansible_ssh_host)
+# will still use destination_variable. Tags should be written as 'tag_TAGNAME'.
+#hostname_variable = tag_Name
+
+# For server inside a VPC, using DNS names may not make sense. When an instance
+# has 'subnet_id' set, this variable is used. If the subnet is public, setting
+# this to 'ip_address' will return the public IP address. For instances in a
+# private subnet, this should be set to 'private_ip_address', and Ansible must
+# be run from within EC2. The key of an EC2 tag may optionally be used; however
+# the boto instance variables hold precedence in the event of a collision.
+# WARNING: - instances that are in the private vpc, _without_ public ip address
+# will not be listed in the inventory until You set:
+# vpc_destination_variable = private_ip_address
+vpc_destination_variable = ip_address
+
+# The following two settings allow flexible ansible host naming based on a
+# python format string and a comma-separated list of ec2 tags.  Note that:
+#
+# 1) If the tags referenced are not present for some instances, empty strings
+#    will be substituted in the format string.
+# 2) This overrides both destination_variable and vpc_destination_variable.
+#
+#destination_format = {0}.{1}.example.com
+#destination_format_tags = Name,environment
+
+# To tag instances on EC2 with the resource records that point to them from
+# Route53, uncomment and set 'route53' to True.
+route53 = False
+
+# To exclude RDS instances from the inventory, uncomment and set to False.
+rds = False
+
+# To exclude ElastiCache instances from the inventory, uncomment and set to False.
+elasticache = False
+
+# Additionally, you can specify the list of zones to exclude looking up in
+# 'route53_excluded_zones' as a comma-separated list.
+# route53_excluded_zones = samplezone1.com, samplezone2.com
+
+# By default, only EC2 instances in the 'running' state are returned. Set
+# 'all_instances' to True to return all instances regardless of state.
+all_instances = True
+
+# By default, only EC2 instances in the 'running' state are returned. Specify
+# EC2 instance states to return as a comma-separated list. This
+# option is overriden when 'all_instances' is True.
+# instance_states = pending, running, shutting-down, terminated, stopping, stopped
+
+# By default, only RDS instances in the 'available' state are returned.  Set
+# 'all_rds_instances' to True return all RDS instances regardless of state.
+all_rds_instances = False
+
+# By default, only ElastiCache clusters and nodes in the 'available' state
+# are returned. Set 'all_elasticache_clusters' and/or 'all_elastic_nodes'
+# to True return all ElastiCache clusters and nodes, regardless of state.
+#
+# Note that all_elasticache_nodes only applies to listed clusters. That means
+# if you set all_elastic_clusters to false, no node will be return from
+# unavailable clusters, regardless of the state and to what you set for
+# all_elasticache_nodes.
+all_elasticache_replication_groups = False
+all_elasticache_clusters = False
+all_elasticache_nodes = False
+
+# API calls to EC2 are slow. For this reason, we cache the results of an API
+# call. Set this to the path you want cache files to be written to. Two files
+# will be written to this directory:
+#   - ansible-ec2.cache
+#   - ansible-ec2.index
+cache_path = ~/.ansible/tmp
+
+# The number of seconds a cache file is considered valid. After this many
+# seconds, a new API call will be made, and the cache file will be updated.
+# To disable the cache, set this value to 0
+cache_max_age = 300
+
+# Organize groups into a nested/hierarchy instead of a flat namespace.
+nested_groups = False
+
+# Replace - tags when creating groups to avoid issues with ansible
+replace_dash_in_groups = True
+
+# If set to true, any tag of the form "a,b,c" is expanded into a list
+# and the results are used to create additional tag_* inventory groups.
+expand_csv_tags = False
+
+# The EC2 inventory output can become very large. To manage its size,
+# configure which groups should be created.
+group_by_instance_id = True
+group_by_region = True
+group_by_availability_zone = True
+group_by_ami_id = True
+group_by_instance_type = True
+group_by_key_pair = True
+group_by_vpc_id = True
+group_by_security_group = True
+group_by_tag_keys = True
+group_by_tag_none = True
+group_by_route53_names = True
+group_by_rds_engine = False
+group_by_rds_parameter_group = False
+group_by_elasticache_engine = True
+group_by_elasticache_cluster = True
+group_by_elasticache_parameter_group = True
+group_by_elasticache_replication_group = True
+
+# If you only want to include hosts that match a certain regular expression
+# pattern_include = staging-*
+
+# If you want to exclude any hosts that match a certain regular expression
+# pattern_exclude = staging-*
+# Ansible EC2 external inventory script settings
+#
+
+##[ec2]
+##
+### to talk to a private eucalyptus instance uncomment these lines
+### and edit edit eucalyptus_host to be the host name of your cloud controller
+###eucalyptus = True
+###eucalyptus_host = clc.cloud.domain.org
+##
+### AWS regions to make calls to. Set this to 'all' to make request to all regions
+##
+### in AWS and merge the results together. Alternatively, set this to a comma
+### separated list of regions. E.g. 'us-east-1,us-west-1,us-west-2'
+##regions = all
+##regions_exclude = us-gov-west-1,cn-north-1
+##
+### When generating inventory, Ansible needs to know how to address a server.
+### Each EC2 instance has a lot of variables associated with it. Here is the list:
+###   http://docs.pythonboto.org/en/latest/ref/ec2.html#module-boto.ec2.instance
+### Below are 2 variables that are used as the address of a server:
+###   - destination_variable
+###   - vpc_destination_variable
+##
+### This is the normal destination variable to use. If you are running Ansible
+### from outside EC2, then 'public_dns_name' makes the most sense. If you are
+### running Ansible from within EC2, then perhaps you want to use the internal
+### address, and should set this to 'private_dns_name'. The key of an EC2 tag
+##...skipping...
+### pattern_include = staging-*
+##
+### If you want to exclude any hosts that match a certain regular expression
+### pattern_exclude = staging-*
+
+# Instance filters can be used to control which instances are retrieved for
+# inventory. For the full list of possible filters, please read the EC2 API
+# docs: http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-DescribeInstances.html#query-DescribeInstances-filters
+# Filters are key/value pairs separated by '=', to list multiple filters use
+# a list separated by commas. See examples below.
+
+# Retrieve only instances with (key=value) env=staging tag
+# instance_filters = tag:env=staging
+
+# Retrieve only instances with role=webservers OR role=dbservers tag
+# instance_filters = tag:role=webservers,tag:role=dbservers
+
+# Retrieve only t1.micro instances OR instances with tag env=staging
+# instance_filters = instance-type=t1.micro,tag:env=staging
+
+# You can use wildcards in filter values also. Below will list instances which
+# tag Name value matches webservers1*
+# (ex. webservers15, webservers1a, webservers123 etc)
+# instance_filters = tag:Name=webservers1*
+
+# A boto configuration profile may be used to separate out credentials
+# see http://boto.readthedocs.org/en/latest/boto_config_tut.html
+# boto_profile = some-boto-profile-name
diff --git a/edge-1601-dc3-dc4/ec2.ini b/edge-1601-dc3-dc4/ec2.ini
new file mode 100644
index 0000000..36b3921
--- /dev/null
+++ b/edge-1601-dc3-dc4/ec2.ini
@@ -0,0 +1,200 @@
+# Ansible EC2 external inventory script settings
+#
+
+[ec2]
+
+# to talk to a private eucalyptus instance uncomment these lines
+# and edit edit eucalyptus_host to be the host name of your cloud controller
+#eucalyptus = True
+#eucalyptus_host = clc.cloud.domain.org
+
+# AWS regions to make calls to. Set this to 'all' to make request to all regions
+# in AWS and merge the results together. Alternatively, set this to a comma
+# separated list of regions. E.g. 'us-east-1,us-west-1,us-west-2'
+regions = all
+regions_exclude = us-gov-west-1,cn-north-1
+
+# When generating inventory, Ansible needs to know how to address a server.
+# Each EC2 instance has a lot of variables associated with it. Here is the list:
+#   http://docs.pythonboto.org/en/latest/ref/ec2.html#module-boto.ec2.instance
+# Below are 2 variables that are used as the address of a server:
+#   - destination_variable
+#   - vpc_destination_variable
+
+# This is the normal destination variable to use. If you are running Ansible
+# from outside EC2, then 'public_dns_name' makes the most sense. If you are
+# running Ansible from within EC2, then perhaps you want to use the internal
+# address, and should set this to 'private_dns_name'. The key of an EC2 tag
+# may optionally be used; however the boto instance variables hold precedence
+# in the event of a collision.
+destination_variable = public_dns_name
+
+# This allows you to override the inventory_name with an ec2 variable, instead
+# of using the destination_variable above. Addressing (aka ansible_ssh_host)
+# will still use destination_variable. Tags should be written as 'tag_TAGNAME'.
+#hostname_variable = tag_Name
+
+# For server inside a VPC, using DNS names may not make sense. When an instance
+# has 'subnet_id' set, this variable is used. If the subnet is public, setting
+# this to 'ip_address' will return the public IP address. For instances in a
+# private subnet, this should be set to 'private_ip_address', and Ansible must
+# be run from within EC2. The key of an EC2 tag may optionally be used; however
+# the boto instance variables hold precedence in the event of a collision.
+# WARNING: - instances that are in the private vpc, _without_ public ip address
+# will not be listed in the inventory until You set:
+# vpc_destination_variable = private_ip_address
+vpc_destination_variable = ip_address
+
+# The following two settings allow flexible ansible host naming based on a
+# python format string and a comma-separated list of ec2 tags.  Note that:
+#
+# 1) If the tags referenced are not present for some instances, empty strings
+#    will be substituted in the format string.
+# 2) This overrides both destination_variable and vpc_destination_variable.
+#
+#destination_format = {0}.{1}.example.com
+#destination_format_tags = Name,environment
+
+# To tag instances on EC2 with the resource records that point to them from
+# Route53, uncomment and set 'route53' to True.
+route53 = False
+
+# To exclude RDS instances from the inventory, uncomment and set to False.
+rds = False
+
+# To exclude ElastiCache instances from the inventory, uncomment and set to False.
+elasticache = False
+
+# Additionally, you can specify the list of zones to exclude looking up in
+# 'route53_excluded_zones' as a comma-separated list.
+# route53_excluded_zones = samplezone1.com, samplezone2.com
+
+# By default, only EC2 instances in the 'running' state are returned. Set
+# 'all_instances' to True to return all instances regardless of state.
+all_instances = True
+
+# By default, only EC2 instances in the 'running' state are returned. Specify
+# EC2 instance states to return as a comma-separated list. This
+# option is overriden when 'all_instances' is True.
+# instance_states = pending, running, shutting-down, terminated, stopping, stopped
+
+# By default, only RDS instances in the 'available' state are returned.  Set
+# 'all_rds_instances' to True return all RDS instances regardless of state.
+all_rds_instances = False
+
+# By default, only ElastiCache clusters and nodes in the 'available' state
+# are returned. Set 'all_elasticache_clusters' and/or 'all_elastic_nodes'
+# to True return all ElastiCache clusters and nodes, regardless of state.
+#
+# Note that all_elasticache_nodes only applies to listed clusters. That means
+# if you set all_elastic_clusters to false, no node will be return from
+# unavailable clusters, regardless of the state and to what you set for
+# all_elasticache_nodes.
+all_elasticache_replication_groups = False
+all_elasticache_clusters = False
+all_elasticache_nodes = False
+
+# API calls to EC2 are slow. For this reason, we cache the results of an API
+# call. Set this to the path you want cache files to be written to. Two files
+# will be written to this directory:
+#   - ansible-ec2.cache
+#   - ansible-ec2.index
+cache_path = ~/.ansible/tmp
+
+# The number of seconds a cache file is considered valid. After this many
+# seconds, a new API call will be made, and the cache file will be updated.
+# To disable the cache, set this value to 0
+cache_max_age = 300
+
+# Organize groups into a nested/hierarchy instead of a flat namespace.
+nested_groups = False
+
+# Replace - tags when creating groups to avoid issues with ansible
+replace_dash_in_groups = True
+
+# If set to true, any tag of the form "a,b,c" is expanded into a list
+# and the results are used to create additional tag_* inventory groups.
+expand_csv_tags = False
+
+# The EC2 inventory output can become very large. To manage its size,
+# configure which groups should be created.
+group_by_instance_id = True
+group_by_region = True
+group_by_availability_zone = True
+group_by_ami_id = True
+group_by_instance_type = True
+group_by_key_pair = True
+group_by_vpc_id = True
+group_by_security_group = True
+group_by_tag_keys = True
+group_by_tag_none = True
+group_by_route53_names = True
+group_by_rds_engine = False
+group_by_rds_parameter_group = False
+group_by_elasticache_engine = True
+group_by_elasticache_cluster = True
+group_by_elasticache_parameter_group = True
+group_by_elasticache_replication_group = True
+
+# If you only want to include hosts that match a certain regular expression
+# pattern_include = staging-*
+
+# If you want to exclude any hosts that match a certain regular expression
+# pattern_exclude = staging-*
+# Ansible EC2 external inventory script settings
+#
+
+##[ec2]
+##
+### to talk to a private eucalyptus instance uncomment these lines
+### and edit edit eucalyptus_host to be the host name of your cloud controller
+###eucalyptus = True
+###eucalyptus_host = clc.cloud.domain.org
+##
+### AWS regions to make calls to. Set this to 'all' to make request to all regions
+##
+### in AWS and merge the results together. Alternatively, set this to a comma
+### separated list of regions. E.g. 'us-east-1,us-west-1,us-west-2'
+##regions = all
+##regions_exclude = us-gov-west-1,cn-north-1
+##
+### When generating inventory, Ansible needs to know how to address a server.
+### Each EC2 instance has a lot of variables associated with it. Here is the list:
+###   http://docs.pythonboto.org/en/latest/ref/ec2.html#module-boto.ec2.instance
+### Below are 2 variables that are used as the address of a server:
+###   - destination_variable
+###   - vpc_destination_variable
+##
+### This is the normal destination variable to use. If you are running Ansible
+### from outside EC2, then 'public_dns_name' makes the most sense. If you are
+### running Ansible from within EC2, then perhaps you want to use the internal
+### address, and should set this to 'private_dns_name'. The key of an EC2 tag
+##...skipping...
+### pattern_include = staging-*
+##
+### If you want to exclude any hosts that match a certain regular expression
+### pattern_exclude = staging-*
+
+# Instance filters can be used to control which instances are retrieved for
+# inventory. For the full list of possible filters, please read the EC2 API
+# docs: http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-DescribeInstances.html#query-DescribeInstances-filters
+# Filters are key/value pairs separated by '=', to list multiple filters use
+# a list separated by commas. See examples below.
+
+# Retrieve only instances with (key=value) env=staging tag
+# instance_filters = tag:env=staging
+
+# Retrieve only instances with role=webservers OR role=dbservers tag
+# instance_filters = tag:role=webservers,tag:role=dbservers
+
+# Retrieve only t1.micro instances OR instances with tag env=staging
+# instance_filters = instance-type=t1.micro,tag:env=staging
+
+# You can use wildcards in filter values also. Below will list instances which
+# tag Name value matches webservers1*
+# (ex. webservers15, webservers1a, webservers123 etc)
+# instance_filters = tag:Name=webservers1*
+
+# A boto configuration profile may be used to separate out credentials
+# see http://boto.readthedocs.org/en/latest/boto_config_tut.html
+# boto_profile = some-boto-profile-name