diff --git a/README.md b/README.md
index d7b1145..e9b489c 100644
--- a/README.md
+++ b/README.md
@@ -5,11 +5,19 @@
 
 ## What is Viper?
 
-Viper is a complete configuration solution. Designed to work within an
-application to handle file based configuration and seamlessly marry that with
-command line flags which can also be used to control application behavior.
-Viper also supports retrieving configuration values from remote key/value stores. 
-Etcd and Consul are supported. 
+Viper is a complete configuration solution for go applications. It has
+been designed to work within an application to handle all types of
+configuration. It supports 
+
+* setting defaults
+* reading from yaml, toml and json config files
+* reading from environment variables
+* reading from remote config systems (Etcd or Consul)
+* reading from command line flags
+* setting explicit values
+
+It can be thought of as a registry for all of your applications
+configuration needs.
 
 ## Why Viper?
 
@@ -19,42 +27,66 @@
 
 Viper does the following for you:
 
-1. Find, load and marshall a configuration file in YAML, TOML or JSON.
-2. Provide a mechanism to setDefault values for your different configuration options
-3. Provide a mechanism to setOverride values for options specified through command line flags.
-4. Provide an alias system to easily rename parameters without breaking existing code.
-5. Make it easy to tell the difference between when a user has provided a command line or config file which is the same as the default.
+1. Find, load and marshal a configuration file in YAML, TOML or JSON.
+2. Provide a mechanism to set default values for your different
+   configuration options
+3. Provide a mechanism to set override values for options specified
+   through command line flags.
+4. Provide an alias system to easily rename parameters without breaking
+   existing code.
+5. Make it easy to tell the difference between when a user has provided
+   a command line or config file which is the same as the default.
 
-Viper believes that:
+Viper uses the following precedence order. Each item takes precedence
+over the item below it:
 
-1. command line flags take precedence over options set in config files
-2. config files take precedence over options set in remote key/value stores
-3. remote key/value stores take precedence over defaults
+ * explicit call to Set
+ * flag
+ * env
+ * config
+ * key/value store
+ * default
 
 Viper configuration keys are case insensitive.
 
 ## Usage
 
-### Initialization
+### Establishing Defaults
+
+A good configuration system will support default values. A default value
+is not required for a key, but can establish a default to be used in the
+event that the key hasn’t be set via config file, environment variable,
+remote configuration or flag.
+
+Examples:
+
+	viper.SetDefault("ContentDir", "content")
+	viper.SetDefault("LayoutDir", "layouts")
+	viper.SetDefault("Indexes", map[string]string{"tag": "tags", "category": "categories"})
+
+### Reading Config Files
+
+If you want to support a config file, Viper requires a minimal
+configuration so it knows where to look for the config file. Viper
+supports yaml, toml and json files. Viper can search multiple paths, but
+currently a single viper only supports a single config file.
 
 	viper.SetConfigName("config") // name of config file (without extension)
 	viper.AddConfigPath("/etc/appname/")   // path to look for the config file in
 	viper.AddConfigPath("$HOME/.appname")  // call multiple times to add many search paths
 	viper.ReadInConfig() // Find and read the config file
 
-### Setting Defaults
-
-	viper.SetDefault("ContentDir", "content")
-	viper.SetDefault("LayoutDir", "layouts")
-	viper.SetDefault("Indexes", map[string]string{"tag": "tags", "category": "categories"})
-
 ### Setting Overrides
 
+These could be from a command line flag, or from your own application logic.
+
     viper.Set("Verbose", true)
     viper.Set("LogFile", LogFile)
 
 ### Registering and Using Aliases
 
+Aliases permit a single value to be referenced by multiple keys
+
     viper.RegisterAlias("loud", "Verbose")
 
     viper.Set("verbose", true) // same result as next line
@@ -65,11 +97,102 @@
 
 ### Getting Values
 
+In Viper there are a few ways to get a value depending on what type of value you want to retrieved.
+The following functions and methods exist: 
+
+ * Get(key string) : interface{}
+ * GetBool(key string) : bool
+ * GetFloat64(key string) : float64
+ * GetInt(key string) : int
+ * GetString(key string) : string
+ * GetStringMap(key string) : map[string]interface{}
+ * GetStringMapString(key string) : map[string]string
+ * GetStringSlice(key string) : []string
+ * GetTime(key string) : time.Time
+ * IsSet(key string) : bool
+
+One important thing to recognize is that each Get function will return
+it’s zero value if it’s not found. To check if it’s found, the IsSet()
+method has been provided.
+
+Example:
+
     viper.GetString("logfile") // case insensitive Setting & Getting
 	if viper.GetBool("verbose") {
         fmt.Println("verbose enabled")
 	}
 
+### Marshaling
+
+You also have the option of Marshaling all or a specific value to a struct, map, etc.
+
+There are two methods to do this:
+
+ * Marshal(rawVal interface{}) : error
+ * MarshalKey(key string, rawVal interface{}) : error
+
+Example:
+
+	type config struct {
+		Port int
+		Name string
+	}
+
+	var C config
+
+	err := Marshal(&C)
+	if err != nil {
+		t.Fatalf("unable to decode into struct, %v", err)
+	}
+
+### Working with Environment Variables
+
+Viper has full support for environment variables. This enables 12 factor
+applications out of the box. There are two methods that exist to aid
+with working with ENV:
+
+ * AutomaticEnv()
+ * BindEnv(input ) : error
+
+When working with ENV variables it’s important to recognize that Viper
+treats ENV variables as case sensitive.
+
+BindEnv takes one or two parameters. The first parameter is the key
+name, the second is the name of the environment variable. The name of
+the environment variable is case sensitive.
+
+If the ENV variable name is not provided then Viper will automatically
+assume that the key name matches the ENV variable name but the ENV
+variable is IN ALL CAPS.
+
+One important thing to recognize when working with ENV variables is that
+the value will be read each time it is accessed. It does not fix the
+value when the BindEnv is called.
+
+
+AutomaticEnv is intended to be a convience helper. It will look for all
+keys that have been set (via defaults, config file, flag, or remote key
+value) and call BindEnv on that key. It does
+not simply import all ENV variables. Because of this behavior it’s
+usually best to call it last.
+
+### Working with Flags
+
+Viper has the ability to bind to flags. Specifically Viper supports
+Pflags as used in the [Cobra](http://github.com/spf13/cobra) library.
+
+Like BindEnv the value is not set when the binding method is called, but
+when it is accessed. This means you can bind as early as you want, even
+in an init() function.
+
+The BindPFlag() method provides this functionality.
+
+Example:
+
+ serverCmd.Flags().Int("port", 1138, "Port to run Application server on")
+ viper.BindPFlag("port", serverCmd.Flags().Lookup("port"))
+
+
 ### Remote Key/Value Store Support
 Viper will read a config string (as JSON, TOML, or YAML) retrieved from a
 path in a Key/Value store such as Etcd or Consul.  These values take precedence
@@ -110,6 +233,35 @@
 	err := viper.ReadRemoteConfig()
 
 
+### Viper or Vipers?
+
+Viper comes ready to use out of the box. There is no configuration or
+initialization needed to begin using Viper. Since most applications will
+want to use a single central repository for their configuration the
+viper package provides this. It is similar to a singleton.
+
+In all of the examples above they demonstrate using viper in it’s
+singleton style approach.
+
+### Working with multiple vipers
+
+You can also create many different vipers for use in your application.
+Each will have it’s own unique set of configurations and values. Each
+can read from a different config file, key value store, etc. All of the
+functions that viper package supports are mirrored as methods on a viper.
+
+Example:
+
+    x  := viper.New()
+    y  := viper.New()
+
+	x.SetDefault("ContentDir", "content")
+	y.SetDefault("ContentDir", "foobar")
+
+    ...
+
+When working with multiple vipers it is up to the user to keep track of
+the different vipers.
 
 ## Q & A
 
@@ -130,5 +282,3 @@
 Q: Why is it called "Cobra"?
 
 A: Is there a better name for a commander?
-
-