resources/ec2.ini - private-cloud-ansible-playbooks/apigee-opdk-playbook-setup-ansible - Git at Google

 # Ansible EC2 external inventory script settings
 #

 [ec2]

 # to talk to a private eucalyptus instance uncomment these lines
 # and edit edit eucalyptus_host to be the host name of your cloud controller
 #eucalyptus = True
 #eucalyptus_host = clc.cloud.domain.org

 # AWS regions to make calls to. Set this to 'all' to make request to all regions
 # in AWS and merge the results together. Alternatively, set this to a comma
 # separated list of regions. E.g. 'us-east-1,us-west-1,us-west-2'
 regions = all
 regions_exclude = us-gov-west-1,cn-north-1

 # When generating inventory, Ansible needs to know how to address a server.
 # Each EC2 instance has a lot of variables associated with it. Here is the list:
 #   http://docs.pythonboto.org/en/latest/ref/ec2.html#module-boto.ec2.instance
 # Below are 2 variables that are used as the address of a server:
 #   - destination_variable
 #   - vpc_destination_variable

 # This is the normal destination variable to use. If you are running Ansible
 # from outside EC2, then 'public_dns_name' makes the most sense. If you are
 # running Ansible from within EC2, then perhaps you want to use the internal
 # address, and should set this to 'private_dns_name'. The key of an EC2 tag
 # may optionally be used; however the boto instance variables hold precedence
 # in the event of a collision.
 destination_variable = public_dns_name

 # This allows you to override the inventory_name with an ec2 variable, instead
 # of using the destination_variable above. Addressing (aka ansible_ssh_host)
 # will still use destination_variable. Tags should be written as 'tag_TAGNAME'.
 #hostname_variable = tag_Name

 # For server inside a VPC, using DNS names may not make sense. When an instance
 # has 'subnet_id' set, this variable is used. If the subnet is public, setting
 # this to 'ip_address' will return the public IP address. For instances in a
 # private subnet, this should be set to 'private_ip_address', and Ansible must
 # be run from within EC2. The key of an EC2 tag may optionally be used; however
 # the boto instance variables hold precedence in the event of a collision.
 # WARNING: - instances that are in the private vpc, _without_ public ip address
 # will not be listed in the inventory until You set:
 # vpc_destination_variable = private_ip_address
 vpc_destination_variable = ip_address

 # The following two settings allow flexible ansible host naming based on a
 # python format string and a comma-separated list of ec2 tags.  Note that:
 #
 # 1) If the tags referenced are not present for some instances, empty strings
 #    will be substituted in the format string.
 # 2) This overrides both destination_variable and vpc_destination_variable.
 #
 #destination_format = {0}.{1}.example.com
 #destination_format_tags = Name,environment

 # To tag instances on EC2 with the resource records that point to them from
 # Route53, uncomment and set 'route53' to True.
 route53 = False

 # To exclude RDS instances from the inventory, uncomment and set to False.
 rds = False

 # To exclude ElastiCache instances from the inventory, uncomment and set to False.
 elasticache = False

 # Additionally, you can specify the list of zones to exclude looking up in
 # 'route53_excluded_zones' as a comma-separated list.
 # route53_excluded_zones = samplezone1.com, samplezone2.com

 # By default, only EC2 instances in the 'running' state are returned. Set
 # 'all_instances' to True to return all instances regardless of state.
 all_instances = True

 # By default, only EC2 instances in the 'running' state are returned. Specify
 # EC2 instance states to return as a comma-separated list. This
 # option is overriden when 'all_instances' is True.
 # instance_states = pending, running, shutting-down, terminated, stopping, stopped

 # By default, only RDS instances in the 'available' state are returned.  Set
 # 'all_rds_instances' to True return all RDS instances regardless of state.
 all_rds_instances = False

 # By default, only ElastiCache clusters and nodes in the 'available' state
 # are returned. Set 'all_elasticache_clusters' and/or 'all_elastic_nodes'
 # to True return all ElastiCache clusters and nodes, regardless of state.
 #
 # Note that all_elasticache_nodes only applies to listed clusters. That means
 # if you set all_elastic_clusters to false, no node will be return from
 # unavailable clusters, regardless of the state and to what you set for
 # all_elasticache_nodes.
 all_elasticache_replication_groups = False
 all_elasticache_clusters = False
 all_elasticache_nodes = False

 # API calls to EC2 are slow. For this reason, we cache the results of an API
 # call. Set this to the path you want cache files to be written to. Two files
 # will be written to this directory:
 #   - ansible-ec2.cache
 #   - ansible-ec2.index
 cache_path = ~/.ansible/tmp

 # The number of seconds a cache file is considered valid. After this many
 # seconds, a new API call will be made, and the cache file will be updated.
 # To disable the cache, set this value to 0
 cache_max_age = 300

 # Organize groups into a nested/hierarchy instead of a flat namespace.
 nested_groups = False

 # Replace - tags when creating groups to avoid issues with ansible
 replace_dash_in_groups = True

 # If set to true, any tag of the form "a,b,c" is expanded into a list
 # and the results are used to create additional tag_* inventory groups.
 expand_csv_tags = False

 # The EC2 inventory output can become very large. To manage its size,
 # configure which groups should be created.
 group_by_instance_id = True
 group_by_region = True
 group_by_availability_zone = True
 group_by_ami_id = True
 group_by_instance_type = True
 group_by_key_pair = True
 group_by_vpc_id = True
 group_by_security_group = True
 group_by_tag_keys = True
 group_by_tag_none = True
 group_by_route53_names = True
 group_by_rds_engine = False
 group_by_rds_parameter_group = False
 group_by_elasticache_engine = True
 group_by_elasticache_cluster = True
 group_by_elasticache_parameter_group = True
 group_by_elasticache_replication_group = True

 # If you only want to include hosts that match a certain regular expression
 # pattern_include = staging-*

 # If you want to exclude any hosts that match a certain regular expression
 # pattern_exclude = staging-*
 # Ansible EC2 external inventory script settings
 #

 ##[ec2]
 ##
 ### to talk to a private eucalyptus instance uncomment these lines
 ### and edit edit eucalyptus_host to be the host name of your cloud controller
 ###eucalyptus = True
 ###eucalyptus_host = clc.cloud.domain.org
 ##
 ### AWS regions to make calls to. Set this to 'all' to make request to all regions
 ### in AWS and merge the results together. Alternatively, set this to a comma
 ### separated list of regions. E.g. 'us-east-1,us-west-1,us-west-2'
 ##regions = all
 ##regions_exclude = us-gov-west-1,cn-north-1
 ##
 ### When generating inventory, Ansible needs to know how to address a server.
 ### Each EC2 instance has a lot of variables associated with it. Here is the list:
 ###   http://docs.pythonboto.org/en/latest/ref/ec2.html#module-boto.ec2.instance
 ### Below are 2 variables that are used as the address of a server:
 ###   - destination_variable
 ###   - vpc_destination_variable
 ##
 ### This is the normal destination variable to use. If you are running Ansible
 ### from outside EC2, then 'public_dns_name' makes the most sense. If you are
 ### running Ansible from within EC2, then perhaps you want to use the internal
 ### address, and should set this to 'private_dns_name'. The key of an EC2 tag
 ##...skipping...
 ### pattern_include = staging-*
 ##
 ### If you want to exclude any hosts that match a certain regular expression
 ### pattern_exclude = staging-*

 # Instance filters can be used to control which instances are retrieved for
 # inventory. For the full list of possible filters, please read the EC2 API
 # docs: http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-DescribeInstances.html#query-DescribeInstances-filters
 # Filters are key/value pairs separated by '=', to list multiple filters use
 # a list separated by commas. See examples below.

 # Retrieve only instances with (key=value) env=staging tag
 # instance_filters = tag:env=staging

 # Retrieve only instances with role=webservers OR role=dbservers tag
 # instance_filters = tag:role=webservers,tag:role=dbservers

 # Retrieve only t1.micro instances OR instances with tag env=staging
 # instance_filters = instance-type=t1.micro,tag:env=staging

 # You can use wildcards in filter values also. Below will list instances which
 # tag Name value matches webservers1*
 # (ex. webservers15, webservers1a, webservers123 etc)
 # instance_filters = tag:Name=webservers1*

 # A boto configuration profile may be used to separate out credentials
 # see http://boto.readthedocs.org/en/latest/boto_config_tut.html
 # boto_profile = some-boto-profile-name
	# Ansible EC2 external inventory script settings
	#

	[ec2]

	# to talk to a private eucalyptus instance uncomment these lines
	# and edit edit eucalyptus_host to be the host name of your cloud controller
	#eucalyptus = True
	#eucalyptus_host = clc.cloud.domain.org

	# AWS regions to make calls to. Set this to 'all' to make request to all regions
	# in AWS and merge the results together. Alternatively, set this to a comma
	# separated list of regions. E.g. 'us-east-1,us-west-1,us-west-2'
	regions = all
	regions_exclude = us-gov-west-1,cn-north-1

	# When generating inventory, Ansible needs to know how to address a server.
	# Each EC2 instance has a lot of variables associated with it. Here is the list:
	# http://docs.pythonboto.org/en/latest/ref/ec2.html#module-boto.ec2.instance
	# Below are 2 variables that are used as the address of a server:
	# - destination_variable
	# - vpc_destination_variable

	# This is the normal destination variable to use. If you are running Ansible
	# from outside EC2, then 'public_dns_name' makes the most sense. If you are
	# running Ansible from within EC2, then perhaps you want to use the internal
	# address, and should set this to 'private_dns_name'. The key of an EC2 tag
	# may optionally be used; however the boto instance variables hold precedence
	# in the event of a collision.
	destination_variable = public_dns_name

	# This allows you to override the inventory_name with an ec2 variable, instead
	# of using the destination_variable above. Addressing (aka ansible_ssh_host)
	# will still use destination_variable. Tags should be written as 'tag_TAGNAME'.
	#hostname_variable = tag_Name

	# For server inside a VPC, using DNS names may not make sense. When an instance
	# has 'subnet_id' set, this variable is used. If the subnet is public, setting
	# this to 'ip_address' will return the public IP address. For instances in a
	# private subnet, this should be set to 'private_ip_address', and Ansible must
	# be run from within EC2. The key of an EC2 tag may optionally be used; however
	# the boto instance variables hold precedence in the event of a collision.
	# WARNING: - instances that are in the private vpc, _without_ public ip address
	# will not be listed in the inventory until You set:
	# vpc_destination_variable = private_ip_address
	vpc_destination_variable = ip_address

	# The following two settings allow flexible ansible host naming based on a
	# python format string and a comma-separated list of ec2 tags. Note that:
	#
	# 1) If the tags referenced are not present for some instances, empty strings
	# will be substituted in the format string.
	# 2) This overrides both destination_variable and vpc_destination_variable.
	#
	#destination_format = {0}.{1}.example.com
	#destination_format_tags = Name,environment

	# To tag instances on EC2 with the resource records that point to them from
	# Route53, uncomment and set 'route53' to True.
	route53 = False

	# To exclude RDS instances from the inventory, uncomment and set to False.
	rds = False

	# To exclude ElastiCache instances from the inventory, uncomment and set to False.
	elasticache = False

	# Additionally, you can specify the list of zones to exclude looking up in
	# 'route53_excluded_zones' as a comma-separated list.
	# route53_excluded_zones = samplezone1.com, samplezone2.com

	# By default, only EC2 instances in the 'running' state are returned. Set
	# 'all_instances' to True to return all instances regardless of state.
	all_instances = True

	# By default, only EC2 instances in the 'running' state are returned. Specify
	# EC2 instance states to return as a comma-separated list. This
	# option is overriden when 'all_instances' is True.
	# instance_states = pending, running, shutting-down, terminated, stopping, stopped

	# By default, only RDS instances in the 'available' state are returned. Set
	# 'all_rds_instances' to True return all RDS instances regardless of state.
	all_rds_instances = False

	# By default, only ElastiCache clusters and nodes in the 'available' state
	# are returned. Set 'all_elasticache_clusters' and/or 'all_elastic_nodes'
	# to True return all ElastiCache clusters and nodes, regardless of state.
	#
	# Note that all_elasticache_nodes only applies to listed clusters. That means
	# if you set all_elastic_clusters to false, no node will be return from
	# unavailable clusters, regardless of the state and to what you set for
	# all_elasticache_nodes.
	all_elasticache_replication_groups = False
	all_elasticache_clusters = False
	all_elasticache_nodes = False

	# API calls to EC2 are slow. For this reason, we cache the results of an API
	# call. Set this to the path you want cache files to be written to. Two files
	# will be written to this directory:
	# - ansible-ec2.cache
	# - ansible-ec2.index
	cache_path = ~/.ansible/tmp

	# The number of seconds a cache file is considered valid. After this many
	# seconds, a new API call will be made, and the cache file will be updated.
	# To disable the cache, set this value to 0
	cache_max_age = 300

	# Organize groups into a nested/hierarchy instead of a flat namespace.
	nested_groups = False

	# Replace - tags when creating groups to avoid issues with ansible
	replace_dash_in_groups = True

	# If set to true, any tag of the form "a,b,c" is expanded into a list
	# and the results are used to create additional tag_* inventory groups.
	expand_csv_tags = False

	# The EC2 inventory output can become very large. To manage its size,
	# configure which groups should be created.
	group_by_instance_id = True
	group_by_region = True
	group_by_availability_zone = True
	group_by_ami_id = True
	group_by_instance_type = True
	group_by_key_pair = True
	group_by_vpc_id = True
	group_by_security_group = True
	group_by_tag_keys = True
	group_by_tag_none = True
	group_by_route53_names = True
	group_by_rds_engine = False
	group_by_rds_parameter_group = False
	group_by_elasticache_engine = True
	group_by_elasticache_cluster = True
	group_by_elasticache_parameter_group = True
	group_by_elasticache_replication_group = True

	# If you only want to include hosts that match a certain regular expression
	# pattern_include = staging-*

	# If you want to exclude any hosts that match a certain regular expression
	# pattern_exclude = staging-*
	# Ansible EC2 external inventory script settings
	#

	##[ec2]
	##
	### to talk to a private eucalyptus instance uncomment these lines
	### and edit edit eucalyptus_host to be the host name of your cloud controller
	###eucalyptus = True
	###eucalyptus_host = clc.cloud.domain.org
	##
	### AWS regions to make calls to. Set this to 'all' to make request to all regions
	### in AWS and merge the results together. Alternatively, set this to a comma
	### separated list of regions. E.g. 'us-east-1,us-west-1,us-west-2'
	##regions = all
	##regions_exclude = us-gov-west-1,cn-north-1
	##
	### When generating inventory, Ansible needs to know how to address a server.
	### Each EC2 instance has a lot of variables associated with it. Here is the list:
	### http://docs.pythonboto.org/en/latest/ref/ec2.html#module-boto.ec2.instance
	### Below are 2 variables that are used as the address of a server:
	### - destination_variable
	### - vpc_destination_variable
	##
	### This is the normal destination variable to use. If you are running Ansible
	### from outside EC2, then 'public_dns_name' makes the most sense. If you are
	### running Ansible from within EC2, then perhaps you want to use the internal
	### address, and should set this to 'private_dns_name'. The key of an EC2 tag
	##...skipping...
	### pattern_include = staging-*
	##
	### If you want to exclude any hosts that match a certain regular expression
	### pattern_exclude = staging-*

	# Instance filters can be used to control which instances are retrieved for
	# inventory. For the full list of possible filters, please read the EC2 API
	# docs: http://docs.aws.amazon.com/AWSEC2/latest/APIReference/ApiReference-query-DescribeInstances.html#query-DescribeInstances-filters
	# Filters are key/value pairs separated by '=', to list multiple filters use
	# a list separated by commas. See examples below.

	# Retrieve only instances with (key=value) env=staging tag
	# instance_filters = tag:env=staging

	# Retrieve only instances with role=webservers OR role=dbservers tag
	# instance_filters = tag:role=webservers,tag:role=dbservers

	# Retrieve only t1.micro instances OR instances with tag env=staging
	# instance_filters = instance-type=t1.micro,tag:env=staging

	# You can use wildcards in filter values also. Below will list instances which
	# tag Name value matches webservers1*
	# (ex. webservers15, webservers1a, webservers123 etc)
	# instance_filters = tag:Name=webservers1*

	# A boto configuration profile may be used to separate out credentials
	# see http://boto.readthedocs.org/en/latest/boto_config_tut.html
	# boto_profile = some-boto-profile-name